 Orbital welding
system
Advantages:
- Easy and
simplified handling, short set up times.
- Uniform
seams, excellent quality of welds
with reduced heat affected zone.
- No tacking, no
sealing, no flushing, low gas
consumption.
- One welding
source for all welding tongs.
- Strong lasting
design, virtually maintenance free.
- Repeatability
of welding seams reduce time for
inspection and approval.
- Easy and
simple operation.
|
This
system meets all the demands for the TIG impulse
welding process combining both simple operation
with best reproducibility of the welding results.
It is especially designed to achieve maximum
performance. The device is programmable. Without
any need of extra equipment it controls remotely
the orbital welding tongs and heads, the clamping
system, the cold wire feeder and the welding TIG
torch. All important
welding data are set and digitally displayed at
the control unit. Upto 12 welding planes can be
called up.
The new orbital
welding generation
This is a two-component
remote controlled orbital welding system with
interior clamping, centering and backing device.
The two-component orbital
welding system simplifies automatic orbital
welding meeting ASTM/DIN standards. New ideas and
innovative approach in design rendered it
possible to reduce investment cost and time
consumption for use in plant and on-site
applications.
The orbital welding tongs
weld all joints automatically. Welding conditions
remain unaltered throughout the cycle due to
special design features and accuracy of
operation.
Special features:
- Infinitely
variable adjustment of the welding,
amperage from 3 - 180 A (100% D.C.) and
infinitely variable adjustment of pulse
time and pulsing ratio.
- Infinitely
variable adjustment of gas pre and
post-flow times.
- Electronic
welding amperage regulation stops signal
automatically or manually at the end of
the welding including overlap.
- Regulation of
the cold wire speed and the speed or the
orbital welding tongs-constant or
synchronised to the impulse welding
current.
- Regulation of
the flow of backing and shielding gas.
- Digital
readout of peak and background welding
current.
- Connection of
TIG hand torch by adapter.
- Computer
interface for measuring X/Y chart
available as an option.
|
