|
Digital
Management System
Film Digitizer
Screen
shot showing a defect
|
Film
Scan 75
Digital Image
Management System for NDT/Medical applications
- Provides the density resolution to visualize subtle, low-contrast abnormalities.
- Laser beam discretely illuminates each point (pixel) on the film, with over 90% of transmitted light collected and measured, for digital resolution and densities that are representative of the original radiograph.
- Patented logarithmic amplifier evenly distributes digital signals to an accuracy of 0.001 optical density, enabling better
digitizing of grayscale detail at higher densities to produce low-noise digital
images.
Film Digitizer:
- Light Source :
HeNe Laser
- Sensor :
Photomultiplier
- Laser Scan
Resolution : 50 to 500 Micron, in steps of 1 Micron
- Film Width :
355 mm max.
- Scan Speed :
355 x 425 mm in 7 seconds (200 Micron Mode)
- Optical
Density Range : 0.05 to 4.7 (with auto density calibration
facility)
- Bit Depth : 12
bit/4096 grey levels
- Interface :
SCSI/USB
- Operating
Temperature : 10 to 35 degrees C
- Operating
System : Microsoft Windows XP
- Power :
230V/50Hz
System
Hardware :
- Desktop PC
with Intel Core 2Duo Processor (2.93GHz)
- 2 GB RAM
- 80 GB or
Higher Hard Disk
- DVD RW drive
- HP Laser
Printer
- High
Resolution Monochromatic Monitor Optional
- 10/100
Ethernet LAN Port
- Keyboard +
Optical Mouse
- Microsoft
Windows XP Professional Operating System
- System Driver
and Resource Recovery Kit
Film Digitizer and Application
Software
Film Digitizer and Digital Management Software supplied by
Shield Alloys
|
